AB1600 SPX Stone Hydraulic power unit for an auto lift. Replaces Fenner Fluid Power. Will fit most 2-Post and some 4-Post surface mount lifts of all makes.
Interchangeable with other brands such as MTE, Monarch, J.S. Barnes and Global Hydraulics.
NOTE: FLAT SHIPPING COST ONLY APPLIES TO THE LOWER 48 STATES. IF YOU ARE OUTSIDE OF THE CONTINENTAL US, PLEASE CALL US AT 215-357-5656 FOR A SHIPPING QUOTE OR E-MAIL US AT SALES@MELROSE1931.COM.
- 2 Horsepower
- 208-230 Volt, 60 cycle
- Single Phase
- 3450 RPM
- 3-1/2 Gallon Transparent Reservoir
- 2.0cc/Rev Pump
- Motor is pre-wired for 230v single phase but can be rewired for 208v.
- Running amperage at 208v is 15 amps
- Running amperage at 230v is 18 amps.
Pressure relief setting is preset and fixed at 2750 PSI. Other
settings available by changing cartridge valve. Let us know what
pressure you need.
Power up (raise) by depressing micro switch, and gravity down by
use of manual lowering valve.
Translucent white plastic reservoir measures 19-1/2" from neck to
bottom and 7” x 7-1/2” square. Allows you to easily monitor oil levels compared to others which are opaque. Power unit overall length is 31-1/2".
Two year manufacturer's warranty by SPX.