Quality Lifts

JSJ5-04-00Q Equalizer Cable for Quality Q-10 Lift - Pair

One pair of JSJ5-04-00Q Equalizer Cables for Q-10 Quality Lift. Cable's length measures at 31'-1/4". NOTE: This cable does NOT fit the Q-10000. We are an authorized Challenger Distributor. Genuine Challenger Parts!

Equalizer Cable for Quality 9000AS and Q-10000 Lifts, Replaces 26K06010

Equalizer Cable for Quality 9000AS and Q-10000 Lifts.  Replaces 26K06010 Cable's length measures at approximately 31'3" from end to end. 8mm cable dia. w/ 13mm stud dia. and 2" threads on stud ends.

Rubber Lift Arm Pad for Quality Lifts Set of 4

Set of 4 rubber lift arm pads for Quality Lifts. Measures 4-3/4" dia. x 1" thick. Has 5/8" hole in center for mounting to lift pad adapter. Replaces 26K25030. Detailed adapter dimensions are: - Diameter of the pad is 4.77" (approx 4-3/4"). -...

E10PBW Challenger Pulley Bracket Weld for Models E10 & Quality Q10

E10PBW Challenger Pulley Bracket Weld for Model E10. This is the bracket weld for the pulleys situated at the bottom of both lift columns. Please see here for proper removal and installation procedure for this bracket.

26M25020 Replacement Arm Support Screw for Quality Lift

Replaces old part # 26K25020. We are an authorized Challenger Distributor. Genuine Challenger Parts!

N33 Equalizer Cable for Rotary SPOA-9 Lift (Set of 2)

Pair of replacement Equalizer Cables for Rotary SPOA-9 lift. Cable measures at 30' 2-3/4" in length, with a 1/4" diameter cable rope. Nylon lock nut included on both end studs. NOTE: This cable will only fit lift models SPOA9-100 and ABOVE (SPOA9-200,...

N39 Equalizer Cable for Rotary SPOA-12 Lift (Set of 2)

Pair of replacement Equalizer Cables for Rotary SPOA-12 lift. Cables measure at 33' 6" in length, with a 5/16" diameter cable rope. Nuts included on both end studs. NOTE: This cable will not fit any SPOA-12 model with 1' or 2' height extensions. This...

Equalizer Cable for Rotary Lift FJ7450 (Set of 2)

Pair of replacement Equalizer Cables for Rotary lift.  Replaces part # FJ7450. Cable measures at 30'  7.18" in length, with a 1/4" diameter cable rope. Nylon lock nut included on both end studs.   BH-7500-23, 7500-23, 750023, FJ7450

N372 Equalizer Cable for Rotary SPOA-10 Lift (Set of 2)

Pair of replacement Equalizer Cables for Rotary SPOA-10 lift. Cable measures at 30' 1/2" in length, with a 5/16" diameter cable rope. Nylon lock nut included on both end studs. NOTE: This cable will not fit any SPOA-10 model with 1' or 2' height...

27M06010 Equalizer Cable for Quality Q-12000 Lifts

27M06010 Equalizer Cable for Quality Q-12000 model lifts. Cable's length measures at 433 1/2" long. We are an authorized Challenger Distributor. Genuine Challenger Parts! IF YOU CAN NOT MEASURE OR UNSURE THAT THIS IS THE CABLE YOU NEED, PLEASE CALL...

26K06185 Quality Power Side Lock Cover

26K06185 Quality Power Side Lock Cover We are an authorized Challenger Distributor. Genuine Challenger Parts!

26K06030 Small Gear Shaft for Quality 9000 and Q-10000 Lifts

26K06030 Small Gear Shaft for Quality Q-9000 and Q-10000 Lifts. We are an authorized Challenger Distributor. Genuine Challenger Parts.

Equalizer Cable for Rotary Lift FJ7449 (Set of 2)

Pair of replacement Equalizer Cables for Rotary lift.  Replaces part # FJ7449. Cable measures at 29'  8.82" in length, with a 1/4" diameter cable rope. Nylon lock nut included on both end studs.   BH-7500-22, 7500-22, 750022, FJ7449

1070911 Equalizer Cable for Post-2010 Forward DP10 & I10 Lifts (Set of 2)

Pair of replacement Equalizer Cables for Forward DP10 & I10 2-post lifts built in 2010 or later. Cable measures at 33' 8" in length, with a 1/4" diameter cable rope. Nylon lock nut included on both end studs. BH723695, BH7236-95