SPX Stone Power Unit for Auto Lift - Hoist AB1600

Product Description

AB1600 SPX Stone Hydraulic power unit for an automotive lift. Replaces Fenner Fluid Power. Will fit most 2-Post and some 4-Post surface mount lifts of all makes.

Interchangeable with other brands such as MTE, Monarch, J.S. Barnes and Global Hydraulics.

-------------------------------------------------------------------------------------------------------------------------------

SPECIFICATIONS

- 2 Horsepower

- 208-230 Volt, 60 cycle

- Single Phase

- 3450 RPM

- 3-1/2 Gallon white transparent reservoir tank

- Power up (raise) by electric switch / Gravity down by manual lowering valve

- 2.0cc/Rev Pump

- Motor is pre-wired for 230v single phase but can be rewired for 208v

- Running amperage at 208v is 15 amps

- Running amperage at 230v is 18 amps

- Power unit overall length is 31-1/2"

- Pressure relief setting is preset and fixed at 2750 PSI

(This power unit comes manufactured with an RV-19 2750 PSI fixed relief valve built into it standard. The pressure relief setting can be adjusted just by changing out this valve. All other relief valves are available on our store and will need to be purchased in tandem with the power unit if you need a different pressure setting. Please let us know in order comments, by phone or e-mail if you'd like us to swap out the relief valve for another after purchasing both parts together.)

-------------------------------------------------------------------------------------------------------------------------------

Two year manufacturer's warranty by SPX.